Description
Standard PLCs (Programmable Logic Controller) with integrated communication and highly efficient processing ability is great for your control systems such as HVAC, printing machine, packaging machine, molding injection machine, inspection system.
Features
- 32-bit CPU for high-speed processing
- Standard PLC-ES2 Series: 16 / 20 / 24 / 32 / 40 / 60 I/O points for a variety of applications
- Built-in 1 RS-232 and 2 RS-485 ports
- Program capacity: 16 k steps
- Data register: 10 k words
- Max. execution speed of basic instructions: 0.35 μs
- RTC function and file register (5 k words)
- Highly efficient processing ability: 1 k steps of programs can be completed within 1ms
- Max. 100 kHz pulse control; specific motion control instructions (mark/masking and instant frequency changing) available for multi-axis applications
- Up to 4 levels of password protection secures your source programs and intellectual property
Specification
| Model | ATO-DVP-ES2 |
| Builit-in I/O | 16 / 20 / 24 / 32 / 40 / 60 I/O points |
| Power Supply | 100 ~ 240V AC (-15% ~ +10%), 50/60Hz ±5% |
| Connector | European standard removable terminal block (Pin pitch: 5mm) |
| Operation | ATO-DVP-ES2 PLC starts to run when the power rises to 95~100V AC and stops when the power drops to 70V AC. If the power is suddenly cut off, the PLC will continue running for 10ms. |
| Power Supply Fuse | 2A / 250V AC |
| Power Consumption | 30VA |
| DC 24V Current Output *1 | 500mA |
| Power Supply Protection | DC 24V output short circuit protection |
| Voltage Withstand | 1500VAC (Primary-secondary), 1500VAC (Primary-PE), 500VAC (Secondary-PE) |
| Insulation Resistance | >5MΩ at 500VDC (between all I/O points and ground) |
| Noise Immunity | ESD (IEC 61131-2, IEC 61000-4-2): 8kV Air Discharge EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2kV, Digital I/O: 1kV, Analog & Communication I/O: 1kV RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m |
| Grounding | The diameter of grounding wire shall not be less than that of L, N terminal of the power supply. (When many PLCs are in use at the same time, please make sure every PLC is properly grounded.) |
| Environment | Operation: 0°C~55°C (temperature), 5~95% (humidity), pollution degree 2 Storage: -25°C~70°C (temperature), 5~95% (humidity) |
| Approvals | UL508, European community EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC |
| Vibration/Shock Immunity | International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea) |
| Weight | See below “Selection Table” |
| Note: *1. It is suggested that the power output should not be supplied to HMIs. |
Selection Table
| Model | Builit-in I/O | Number of Inputs | Number of Outputs | Output Type |
Weight |
| DVP16ES200R | 16 | 8 | 8 | Relay | 377g |
| DVP16ES200T | 16 | 8 | 8 | Transistor | 351g |
| DVP24ES200R | 24 | 16 | 8 | Relay | 414g |
| DVP24ES200T | 24 | 16 | 8 | Transistor | 387g |
| DVP32ES200R | 32 | 16 | 16 | Relay | 489g |
| DVP32ES200T | 32 | 16 | 16 | Transistor | 432g |
| DVP40ES200R | 40 | 24 | 16 | Relay | 554g |
| DVP40ES200T | 40 | 24 | 16 | Transistor | 432g |
| DVP58ES200R | 58 | 24 | 36 | Relay | 554g |
| DVP58ES200T | 58 | 24 | 36 | Transistor | 498g |
| DVP60ES200R | 60 | 36 | 24 | Relay | 705g |
| DVP60ES200T | 60 | 36 | 24 | Transistor | 622g |
PLC I/O Point Specification
| Input Points |
||||
| Input Point No. | X0 ~ X3 #1 | X4 ~ X7 | X10 ~ X17, X20 ~ #2 | |
| Input Point Type | Digital input | |||
| Input Form | DC (SINK or SOURCE) | |||
| Input Currrent | 24VDC, 5mA | |||
| Input Impedance | 4.7KΩ | |||
| Max. Input Frequency | 100kHz | 10kHz | 60Hz | |
| Action Level | Off → On | >15VDC | ||
| On → Off | < 5VDC | |||
| Response Time | Off → On | < 2.5μs | < 20μs | < 10ms |
| On → Off | < 5μs | < 50μs | < 15ms | |
| Filter Time | X0 ~ X7 | Adjustable within 0 ~ 20ms in D1020 (Default: 10ms) |
| Output Points |
|||||
| Output Point Type | Relay – R | Transistor – T | |||
| Output Point No. | All | Y0, Y2 | Y1, Y3 | Y4 ~ Y17, Y20 ~ #2 | |
| Voltage Spec. | < 250VAC, 30VDC | 5 ~ 30VDC #3 | |||
| Max. Output Frequency | 1Hz | 100kHz | 10kHz | 1kHz | |
| Maximum Load | Resistive | 2A/point (5A/COM) | 0.5A/1 point (4A/COM) #5 | ||
| Inductive | #4 | 15W (30VDC) | |||
| Lamp | 20W DC/100W AC | 2.5W (30VDC) | |||
| Response Time | Off → On | Approx .10ms | < 2μs | < 20μs | < 100μs |
| On → Off | < 3μs | < 30μs | < 100μs | ||
| Note: #1. The counting frequency of X1 and X3 on the DVP-ES200 series PLCs has increased from 10kHz to 100kHz after 2013. #2. Please refer to “I/O Terminal Layouts” for the max. X/Y No. on each model. #3. UP, ZP must work with external auxiliary power supply 24V DC (-15% ~ +20%), rated consumption approx. 1mA/point. #4. Life curves #5. ZP for NPN COM, UP for PNP COM. |
Product Details
PLC Dimensions (Unit: mm)
| Model | DVP16ES200R/T | DVP24ES200R/T | DVP32ES200R/T | DVP40ES200R/T | DVP58ES200R/T | DVP60ES200R/T |
| L | 105 | 125 | 145 | 165 | 225 | 225 |
| L1 | 97 | 117 | 137 | 157 | 217 | 217 |
Reviews
There are no reviews yet.