Description
High-performance Programmable Logic Controller (PLC) DVP-EH3 provides large program capacity (30k steps) and data register (12k words) for more demanding and complex applications such as high-speed 3-axis servo welding machine, high-speed cutting machine, bar feeder, distributed monitor system in production line.
Specification
| Model | ATO-DVP-EH3 |
| Built-in I/O Points | 16 / 20 / 32 / 40 / 48 / 60 / 80 |
| Power Supply | 100 ~ 240V AC (-15% ~ +10%), 50/60Hz ±5% |
| Fuse Capacity | 2A / 250V AC |
| Power Consumption | 16/20 I/O: 50VA 32/40/48 I/O: 60VA 60/80 I/O: 80VA |
| DC 24V Current Output | 500mA |
| Power Supply Protection | DC 24V output short circuit protection |
| Voltage Withstand | 1500VAC (Primary-secondary), 1500VAC (Primary-PE), 500VAC (Secondary-PE) |
| Insulation Resistance | >5MΩ at 500VDC (between all I/O points and ground) |
| Noise Immunity | ESD: 8kV Air Discharge EFT: Power Line: 2kV, Digital I/O: 1kV, Analog & Communication I/O: 1kV Damped-Oscillatory Wave: Power Line 1kV, Digital I/O: 1kV RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m |
| Grounding | The diameter of grounding wire shall not be less than that of L, N terminal of the power supply. (When many PLCs are in use at the same time, please make sure every PLC is properly grounded.) |
| Environment | Operation: 0°C~55°C (temperature), 5~95% (humidity), pollution degree 2 Storage: -25°C~70°C (temperature), 5~95% (humidity) |
| Vibration/Shock Resistance | International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/ IEC61131-2 & IEC 68-2-27 (TEST Ea) |
| Weight | See below “Selection Table” |
Selection Table
| Model | No. of Inputs |
No. of Outputs |
Output Type |
Input/Output | Weight |
| DVP16EH00R3 | 8 | 8 | Relay | 2 counters of 200 kHz input | 500g |
| DVP16EH00T3 | 8 | 8 | Transistor | 2 counters of 200 kHz input 2 axes of 200 kHz output |
480g |
| DVP20EH00R3 | 12 | 8 | Relay | 2 counters of 200 kHz input, 1 counter of 20 kHz input |
520g |
| DVP20EH00T3 | 12 | 8 | Transistor | 2 counters of 200 kHz input, 2 axes of 200 kHz output |
500g |
| DVP32EH00R3 | 16 | 16 | Relay | 4 counters of 200 kHz input | 652g |
| DVP32EH00T3 | 16 | 16 | Transistor | 4 counters of 200 kHz input, 4 axes of 200 kHz output |
612g |
| DVP32EH00M3 | 16 | 16 | Relay Differenttial output |
4 counters of 200 kHz input (Differenttial: 2 sets), 2 axes of 200 kHz output (Differenttial: 2 axes) |
644g |
| DVP32EH00MT | 16 | 16 | Transistor Differenttial output |
4 counters of 200 kHz input (Differenttial: 2 sets) 2 axes of 200 kHz output (Differenttial: 2 axes) |
615g |
| DVP32EH00R3-L* | 16 | 16 | Relay | 4 counters of 200 kHz input | 652g |
| DVP32EH00T3-L* | 16 | 16 | Transistor | 4 counters of 200 kHz input 4 axes of 200 kHz output |
612g |
| DVP40EH00R3 | 24 | 16 | Relay | 4 counters of 200 kHz input | 710g |
| DVP40EH00T3 | 24 | 16 | Transistor | 4 counters of 200 kHz input 4 axes of 200 kHz output |
675g |
| DVP48EH00R3 | 24 | 24 | Relay | 4 counters of 200 kHz input | 748g |
| DVP48EH00T3 | 24 | 24 | Transistor | 4 counters of 200 kHz input 4 axes of 200 kHz output |
688g |
| DVP64EH00R3 | 32 | 32 | Relay | 4 counters of 200 kHz input | 836g |
| DVP64EH00T3 | 32 | 32 | Transistor | 4 counters of 200 kHz input 4 axes of 200 kHz output |
756g |
| DVP80EH00R3 | 40 | 40 | Relay | 4 counters of 200 kHz input | 948g |
| DVP80EH00T3 | 40 | 40 | Transistor | 4 counters of 200 kHz input 4 axes of 200 kHz output |
848g |
Note: * Supports high-speed extension (left-side).
PLC I/O Point Specification
| Input Points |
||||||
| Item | Two Differential Inputs (200kHz) | 24V DC Single Common Port Input | ||||
| 200kHz | 20kHz | 10kHz | Normal Input | |||
| Input Wiring Type | Independent wiring | Change wiring from S/S to SINK or SOURCE | ||||
| Input Voltage (±10%) | 5~24V DC | 24V DC | ||||
| Input Point Configuration | #1 | #2 | #3 | #4 | #5 | |
| Input Impedance | 4.7k Ohm | 3.3k Ohm | 4.7k Ohm | |||
| Active Level | Off → On | >1mA (5V) | >6mA (18.5V) | >4mA (16.5V) | ||
| On → Off | <0.4mA (2V) | <2.2mA (8V) | <1.5mA (8V) | |||
| Response Time #6 | Off → On | <150ns | <150ns | <3.5μs | <8μs | <10ms |
| On → Off | <3μs | <3μs | <20μs | <60μs | <20ms | |
| #1. For DVP32EH00M3/MT, the bandwidth of the two differential input points X0, X1, X4, and X5 is 200kHz. #2. The bandwidth of the input points X0, X1, X4, X5, X10, X11, X14, and X15 is 200kHz (excluding X10 and X11 on DVP20EH3). #3. For DVP20EH00R3/T3, the bandwidth of the input points X10 and X11 is 20kHz. #4. The bandwidth of the input points X2, X3, X6, X7, X12, X13, X16, and X17 is 10kHz. #5. X20 and above on EH3 are normal input points. #6. The filter times of X0~X7 and X10~X17 can be adjusted by D1020 and D1021 respectively within 0~60ms. |
| Output Points |
||||
| Item | Two Differential Outputs #1 | Single Common Port Transistor Output |
Single Common Port Relay Output |
|
| High Speed #2 | Low Speed #3 | Normal Output #4 | ||
| Max. Frequency | 200kHz | 200kHz | 10kHz | Load ON/OFF control |
| Minimum Load | – | 2mA/DC power supply | ||
| Working Voltage | 5VDC | 5~30VDC | <250VAC, 30VDC | |
| Insulation | Line driver | Photo coupler isolation | Magnetic isolation | |
| Maximum Load | Resistive | <25mA | 0.5A/1 point (4A/COM) | 2A/1 point (5A/COM) |
| Inductive | – | 12W (24VDC) | #5 | |
| Lamp | – | 2W (24VDC) | 20WDC/100WAC | |
| Max. Output Response Time | 0.2μs | 0.2μs | Off → On: 20μs On → Off: 30μs |
10ms |
| Over-Current Protection | N/A | |||
| #1. For DVP32EH00M3, the bandwidth of the differential output points Y0~Y3 is 200kHz, and the other output points are relay output points. For DVP32EH00MT, the bandwidth of the differential output points Y0~Y3 is 200kHz, and the other output points are transistor output points. #2. For DVP40/48/64/80EH3, the bandwidth of the output points Y0~Y3, Y4 and Y6 is 200kHz. For DVP16/20EH3, the bandwidth of the output points Y0 and Y2 is 200kHz. For DVP32EH3, the bandwidth of the output points Y0, Y2, Y4, and Y6 is 200kHz. #3. For DVP40/48/64/80EH3, the bandwidth of the output points Y5 and Y7 is 10kHz. For DVP16/20EH3, the bandwidth of the output points Y1 and Y3~Y7 is 10kHz. For DVP32EH3, the bandwidth of the output points Y1, Y3, Y5, and Y7 is 10kHz. #4. Y10 and above on EH3 are normal output points. #5. Life curves for relays |
Dimensions (Unit: mm)
| Model | 16EH00R/T3 | 20EH00R/T3 | 32EH00R/T3 | 32EH00M3/MT | 40EH00R/T3 | 48EH00R/T3 | 64EH00R/T3 | 80EH00R/T3 |
| W | 113 | 113 | 143.5 | 158.8 | 158.8 | 174 | 212 | 276 |
| W1 | 103 | 103 | 133.5 | 153.8 | 153.8 | 164 | 202 | 266 |
DVP-EH3 Programmable Logic Controller (PLC) Features
1. High-performance Programmable Logic Controller (PLC) with large program capacity and data registers for more demanding and complex applications
- Program capacity: 30 k steps
- Data register: 12 k words
- Execution speed: 4X
2. Excellent Motion Control
- High-speed pulse output: 4 axes of 200kHz pulse output (DVP40/48/64/80EH00T3 ONLY)
- Supports max. 4 hardware 200kHz high-speed counters
- Various motion control instructions to achieve high-speed and high-precision positioning control for labeling machines, packaging machines, printing machines, etc.
- Offers linear / arc interpolation motion control
- Provides up to 16 external interrupt pointers
3. Complete Program Protection
- Auto backup function to prevent programs and data loss even when the battery runs out
- Secondary backup function saves an extra copy of programs and data to enhance program safety
- Up to 4-level password protection to protect your source programs and intellectual property
4. Outstanding Operation Performance
- 32-bit CPU + ASIC dual processors support floating point operations
- Max. execution speed of basic instructions up to 0.24μs
5. Flexible Function Extension Modules & Cards
- Multiple selections of extension modules and function cards: analog I/O, temperature measurement, additional single-axis motion control, high-speed counting
- The 3rd serial communication port and Ethernet communication card are available.
6. PLC-Link
-
PLC Link allows the user to link up a max. 32 units to the network without installing extra communication extension modules.
Reviews
There are no reviews yet.