Description
Pt100 RTD sensor probes with 4 kinds of dimension can be used in different temperature measurement applications. 3 wire Pt100 probes are usually used with temperature controller, signal isolator and paperless recorder to form a temperature monitoring system.
Specification
| Model * | ATO-RTD-WZP-PT100-1 | ATO-RTD-WZP-PT100-2 | ATO-RTD-WZP-PT100-3 | ATO-RTD-WZP-PT100-4 |
| Shipping weight | 0.5kg | |||
| Probe material | Stainless steel | Brass | Stainless steel | Stainless steel |
| Probe dimension | Length: 30mm Diameter: 4mm |
Length: 25mm Diameter: 8mm |
Length: 10mm Maximum width: 8mm Hole diameter: 4mm |
Length: 50mm Diameter: 6mm Thread: M20*1.5mm |
| Cable material | PTFE corrosion-resistant and silver-plated wire | |||
| Cable length * | 1m, 2m, 3m, 4m, 5m, customizable | |||
| Type of probe | Pt100 | |||
| Measuring range | -50~+200℃ (-58~+392℉) | |||
| Temperature coefficient | TCR=3850ppm/k | |||
| Accuracy | Class A: ±(0.15+0.002|T|), T is the actual measurement temperature. | |||
| Stability | R0 drift≤0.04% (500℃/932℉, after 1000 hours) | |||
| Anti-vibration | ≥40g acceleration (10~2000Hz) | |||
| Insulation resistance | ＞100MΩ (20℃/68℉), ＞2MΩ (500℃/932℉) | |||
| Natural coefficient | 0.4K/mW (0℃/32℉) | |||
| Application | Oven, water tank, laboratory, various equipment needing temperature measurement | Temperature measurement on the solid surface and end face of motor or boiler | Motor or bearing surface temperature measurement | Pipelines, containers, various equipment needing temperature measurement |
Note: * denotes optional parameters, you can select parameters in drop-down lists to finish your order. Some customizable parameters can’t be selected from the lists directly, please contact customer service staff for further communication.
Feature
- Enhanced Signal Stability: Silver-plated shielding cable provides better signal clarity and stronger anti-interference performance than standard shielded wires.
- Low-Resistance U-Type Terminals: U-type connectors reduce terminal resistance, helping improve temperature measurement accuracy.
- Thicker Conductors for Accuracy: 2mm diameter wires offer lower resistance compared to 1mm wires, effectively minimizing measurement error.
- Durable Stainless Steel Construction: RTD sensor probe made from 304 stainless steel for excellent high-temperature resistance and corrosion protection, ensuring long service life.
Detail
Application
Tips: RTD sensor probe for air or object surface temperature measurement
Compared to the RTD sensor, thermocouples can operate at much higher temperatures and respond faster. However, the voltage signal generated by a thermocouple is low and may require additional amplification, which is a disadvantage in environments with high electrical noise. Unlike thermocouples, RTD sensors do not require reference points, ice baths, or temperature compensation circuits. RTD sensor has a very low thermal mass, so it provides true surface temperature measurement value and response times as fast as 50ms.
When using an RTD sensor probe to measure the air temperature of a pipeline, the front end of the air temperature probe must be perpendicular to the measured pipeline and fully contact the measured air. The contact surface between the surface RTD probe and the measured object must be flat, otherwise, the measurement result will be affected during the measurement.
Reviews
There are no reviews yet.