Description
Random Orbital Sander Features
- Variety of models, round sanders and square sanders with different sizes of sanding discs are available.
- Sanders adopt dust-proof design, have a dust-sealed switch, provide a dustless environment for grinding work and prevents dust from affecting the machine normal operation.
- The sanding disc can randomly generate orbital motion. Moving in a small ellipse, produce random orbital sanding action. Can avoid the abrasive passing through the same path twice during the same rotary process.
- Pneumatic sander is air-powered sanding tool, making processing easier and more efficient, and more suitable for finishing than sheet sander.
- Grinding method are dry grinding and wet grinding. Sanding methods are dry sanding and wet sanding.
Specification
| Model | ATO-ROS-2010356 | ||
| Round Sander Specification | |||
| Sanding Disc Pad Diameter | 75mm (3 inch) | 125mm (5 inch) | 150mm (6 inch) |
| Number of Holes | 3 | 6 | 17 |
| No-Load Speed | 12000rpm | 12000rpm | 12000rpm |
| Orbit | 2.5, 5mm | 2.5, 5.8mm | 2.5, 5.8mm |
| Square Sander Specification | |||
| Sanding Disc Pad Dimension | 93*176mm | 90*180mm | 112*220mm |
| No-Load Speed | 7000rpm | 10000rpm | 10000rpm |
| Orbit | 3mm | 3mm | 3mm |
| General Specification | |||
| dBa | 60dBa | ||
| Vacuum System | central vacuum | ||
| Air Consumption | 480L/min | ||
| Power | 240W | ||
| Working Pressure | 6.0kg/m2 | ||
| Certification | CE | ||
| Frequency | 50/60Hz | ||
| Suction Joint | 34mm |
Random Orbital Sander Structure Diagram (Take round sander as an example)
Round Sander Dimension Drawing (Take the sander with 75mm sanding disc as example)
Square Sander Dimension Drawing (Take the sander with 93*176mm sanding disc as example)
Tips: How to use the random orbital sander?
Random orbital air-powered sander is a high efficiency sanding tools for polishing, grinding and sanding. Users should strictly follow the use precautions to achieve optimal sanding effects and work efficiency.
- Start the random orbital sander. Keep it spinning until reach the speed you need before touching the sanding material.
- Always operate the random orbital sander along the direction of the material texture during sanding.
- Do not press the random orbital sander down. If apply excessive pressure to it, working efficiency of the sander will be reduced and even shorten its life. Therefore, the best endurance of the sander should be its own weight and the weight of your arm.
- Never tip the sander to the side to sand material. Sander tilting will create low spot on the product surface and is difficult to recover.
- Contact area between the sanding material surface and disc pad of the sander never not be less than 2/3 of disc pad. Especially when sanding the material edges.
- Remove the material from random orbital sander before stop it.
Reviews
There are no reviews yet.