Description
30kW portable industrial diesel fan heater works at single phase 110 volt / 60Hz or 220 volt / 50Hz AC power supply, with strong and long lasting construction, cut-off protection, if no fuel, heater will cut off the power. It is suitable for heating warehouse, factories, and workshops.
Parameter List
| Model | ATO-ZBK100 |
| Power Supply | Single phase AC 110V/60Hz, 220V/50Hz (Other voltages can be customized) |
| Power | 30kW |
| Fuel | Diesel, Kerosene (Note that our heater using diesel and electricity for power at the same time) |
| Fuel Tank | 38L |
| Fuel Consumption | 2.8L/h |
| Heating Area | 600m3 |
| Ignition Type | Continuous spark ignition |
| Thermostat Control | Yes |
| Waterproof Class | IPX4 |
| Work Temperature | 5℃-45℃ |
| Certification | CE, RoHS |
| Warranty | 12 months |
| Product Size | 830*445*460mm |
| Net Weight | 24kg |
Fan Heater Details
Spare Parts
Input Power Cable Selection
7 Tips for Using a Diesel Fan Heater
- Use only diesel or kerosene specified by the industrial heater.
- All the flame indicators are off, and the fuel can be added only after the fuel heater is cooled down.
- When refueling, check whether there are leaks at the connection between the oil pipe and the oil pipe. Before the fan heater runs, any leaks must be repaired.
- All fuel should be stored at least 1 meter away from heaters, flamethrowers, welding equipment and similar ignition sources.
- Fuel storage should be limited to areas that do not allow fuel to penetrate or are not ignited in low-lying areas.
- Do not use diesel heaters where gasoline, paint thinners, or other highly flammable gases are present. When using the heater, use it in accordance with the instructions.
- When using fan heaters near oilcloths, canvas, and similar materials, the heaters should be placed at a safe distance from these materials. The recommended minimum safety distance is 500cm.
Reviews
There are no reviews yet.