Description
200 MHz dual channel handheld digital oscilloscope with1 GSa/s sample rate, max. waveform capture rate up to 10,000 wfms/s. Digital handheld oscilloscope has two acquisition modes, high refresh, deep storage, 7 kinds of auto measurement, cursor measurement function and save function.
Specification
Performance Characteristics
| Model | ATO-HDS2202 |
| Bandwidth | 200MHz |
| Channel | 2 channel |
| Sample rate | 1 GSa/s |
| Acquisition model | Sample, Peak detect |
| Record length | 6K |
| Display | 3.5 inch LCD |
| Waveform refresh rate | 10000 wfrms/s |
| Input coupling | DC, AC, Ground |
| Input impedance | 1 MΩ±2%, in parallel with 16 pF±10 pF |
| Probe attenuation | 1X,10X,100X,1000X |
| Max. input voltage | 400V (DC+AC, PK – PK) |
| Bandwidth limit(typical) | 20MHz / Full bandwidth |
| Sampling rate range |
2ns/div – 1000s/div, step by 1- 2- 5 |
| Sensitivity Resolution | 10mV/div~10V/div |
| Low Frequency（-3db） | ≥10 Hz (at input, AC coupling) |
| Rise time (at input, Typical) | ≤8ns |
| Trigger type | Edge |
| Trigger model | Auto, Normal, single |
| Trigger level range | ±4 div from the screen center |
| Automatic measurement | Period, Frequency, Mean, PK-PK, Max, Min |
| Cursor measurement | ΔV, ΔT, ΔT&ΔV between cursors,auto cursor |
| Communication interface | USB Type-C |
Digital Multimeter Specification
| Full-scale reading | 4.5 digitals (max 20000 count) |
| Testing Modes |
Voltage, Current, Resistance, Capacitance, Diode, Continuity |
| Maximum Input Voltage | AC 750V, DC 1000V |
| Maximum Input Current | DC: 10A, AC: 10A |
| Diodes Test | 0-2V |
Accessories
- Quick Guide
- USB Cable
- Probe
- Probe Adjust
- Multimeter
- Lead
- BNC plug to alligator clips cable
- Soft Bag
Dimension (mm)
Details
Tips: What are the functions of a handheld oscilloscope?
The handheld oscilloscope is a digital storage oscilloscope, digital multimeter and recorder functions in one test measurement instrument, its battery-powered form, the handheld oscilloscope is a practical new instrument in the field of electronic measurement.
The traditional handheld oscilloscope is required to observe the two electrical signals added to the oscilloscope X, Y to control the offset of the electronic instrument to carry out, thus also obtaining the fluorescent screen on the relationship between the two electrical signals on the displayed waveform. Obviously, the size of this analog handheld oscilloscope is very large, so it also brings some trouble to the staff in operation.
Nowadays, the handheld oscilloscope has become very popular, its small size, and simple and convenient operation can bring convenience to many users. Therefore, the digital oscilloscope (handheld) that we use today is very common and recognized by people. We also believe that in the future, there will be more good products out to serve people.
Reviews
There are no reviews yet.