Sale!

6000 Watt 48V Pure Sine Wave Inverter Charger

Original price was: $1,530.15.Current price is: $298.98.

🚚 Free Shipping Over $60!

⚡ Fast Shipping

🔒 Secure Payment

⭐ Trusted Quality

💬 Friendly Customer Support

📦 Fast Nationwide Delivery

SKU: ATO-PI-LW6000 Category:

Description

6000W pure sine wave inverter / charger with pure sine wave output is low frequency type with transformer, UPS function. The combined inverter / charger delivers reliable AC power from 24V or 48V DC battery bank, ideal for powering refrigerators, air conditioners, TVs, fans, computers, audio/video components or other equipment, appliances and electronics. It is widely applied in wind generator, solar power system, house, vehicle, RV, ship, navigation, mobile electricity work and telecommunications device, launch station and any places where the city power is needed.

Features

  • 4000 Watt continuous output power
  • Peak power is 3 times of rating power
  • Pure sine wave output, available for sensitive loads such as air conditioner, motor door, etc.
  • Fast and powerful inverter charger, 3-step progressive charging, 7 battery type selector
  • High power factor
  • Automatically transfer between battery and line mode
  • Microprocessor control guarantees the high reliability
  • Optional remote control function
  • Multi safety protections against over load, over temperature, over charging, and low battery
  • LCD digital display shows voltage, load and battery info in real time
  • Apply for split phase system, 2 live lines 1 neutral line, and voltage is 120V/240V

6000W Inverter/Charger Specification

Model LW6000
Power 6000 Watt
AC Input Phase Single Phase
Waveform Pure Sine Wave
Voltage* 110V/120V AC or 220V/230V/240V AC
Acceptable Voltage 95-126V AC or 194-253V AC±4%
Low Line Disconnect 85V AC±4% or 184V AC±4%
Low Line Re-connect 95V AC±4% or 194V AC±4%
High Line Disconnect 136V AC±4% or 263V AC±4%
High Line Re-connect 126V AC±4% or 253V AC±4%
Frequency 50Hz: 41-54Hz or 60Hz: 51-64Hz (Auto detection)
AC Output Phase & Waveform Single Phase & Pure Sine Wave (bypass mode sync to input)
Voltage* 110V/120V AC or 220V/230V/240V AC
120V/240V AC split phase output Also Available: L1+L2=240V, L1+N=120V, L2+N=120V
Voltage Regulation ±10%rms (bypass mode sync to input)
Frequency 50Hz±0.3Hz or 60Hz±0.3Hz (bypass mode sync to input)
Peak Power 3 times of rating power (18000W)
Short Circuit Protection Yes, shutdown after 10ms
Power Factor 0.9-1.0
Outlet Wiring terminal block
DC Input Battery Voltage* 48V DC
Minimum Start Voltage 40V DC
Low Battery Alarm 42±1.2V DC
Low DC Input Shut-down 40±1.2V DC
High DC Voltage Alarm & Fault 64±1.2V DC
High DC Input Recovery 62±1.2V DC
Max Charger Current 20A/35A/50A/75A/90A (According to the inverter model)
Efficiency Line Mode >96%
Battery Mode >85%
General Power Saver Load ≤ 25W (Enabled on “P/S auto” setting of Remote control)
Audible Alarm Sounding when the heat sink’s temperature is over 105℃ and shutdown after 30 seconds.
Over Load Protection 110%<load<150%, beeps 0.5s every 1s, and Fault after 60s.
Load>150%, beeps 0.5s every 1s, and Fault after 20s.
Protections Low battery, over charging, over temperature, over load
Remote Control* Wired remote control (5m) for power on/off
Indicators LCD display
Operating Environment 0-40℃, 0-90%℃ RH (non-condensing)
Protection Grade IP20
Audible Noise <60dB
Net Weight 48kg
Dimension (LxWxH) 660×225×200mm

Note:
* It can be selected in the drop-down list.

Details

Inverter/Charger Working Principle & Applications

Inverter Split-Phase Output Terminal Description

Tips: Why choosing a low frequency pure sine wave inverter charger?

The low frequency inverter charger generates pure sine wave so it can run resistance and inductive load al well as capacitive load like motor. The inverter / charger features anti-interference, high adaptability, strong practicability with AC bypass mode and auto charging functions.

Compared to high frequency inverter charger, it enjoys great advantages.
1. The low frequency inverter / charger has higher reliability than the high frequency one, so it is not easily damaged.
2. It has stronger load capacity, especially for the impact load, compared to the high frequency inverter.
3. The low frequency inverter charger is able to suppress higher harmonic components in the waveform.
4. It has better overload and short circuit protections than the high frequency inverter.

Reviews

There are no reviews yet.

Be the first to review “6000 Watt 48V Pure Sine Wave Inverter Charger”

Your email address will not be published. Required fields are marked *