Description
Mini linear actuator is a small and compact unit capable of lifting low to medium forces. The provided actuator max load is 800N in pull/push, 12V/24V DC four voltage options are available, it can be used with any application that requires moving something in a straight line.
Electric Linear Actuator Specifications
| Model | ATO-DJ806 |
| Max. Dynamic Load | 800N |
| Max. Self-locking | 1200N |
| Input Voltage | 12V DC, 24V DC, 36V DC, 48V DC (Option) |
| Rated Power | 0.2kW |
| Rated Speed | 4000 rpm |
| Lead Screw | Acme Screw |
| Operation Mode | Electrical |
| Stroke Range | 50-1000mm |
| Stroke Accuracy | ±3mm |
| Duty Cycle | 25% |
| Motor Type | Brushed DC |
| Application | Industrial |
| Operational Temp. | -10℃ to 65℃ |
| Operating Noise | ≤65 dB |
| Weather Protection | IP66 |
| Overload Protection | None (standard) |
| Position Feedback | None (standard), Endstop signal, Potentiometer for optional |
| Weight | 2.5kg |
Linear Actuator Load and Speed Selection
| Code | Max. Dynamic Load |
Max. Self-locking |
Reduction Ratio |
Pitch | Speed±10% (mm/s) |
Max.stroke without potentiometer |
|
| (N) | (N) | — | (mm) | No Load | Full Load | (mm) | |
| A | 200 | 300 | 5:1 | 3.17 | 40 | 22 | 1000 |
| B | 100 | 150 | 5:1 | 5 | 60 | 45 | 1000 |
| C | 50 | 100 | 5:1 | 7.5 | 80 | 65 | 1000 |
| D | 600 | 900 | 20:1 | 3.17 | 10.5 | 7 | 1000 |
| E | 500 | 800 | 20:1 | 5 | 16.5 | 12 | 1000 |
| F | 250 | 400 | 20:1 | 7.5 | 25 | 20 | 1000 |
| G | 1000 | 1500 | 30:1 | 3.17 | 7.2 | 5 | 1000 |
| H | 700 | 1000 | 30:1 | 5 | 11.5 | 8.5 | 1000 |
| I | 400 | 600 | 30:1 | 7.5 | 17 | 13.5 | 1000 |
| J | 1200 | 1700 | 40:1 | 3.17 | 5.5 | 4 | 1000 |
| K | 800 | 1200 | 40:1 | 5 | 8.5 | 6.5 | 1000 |
| L | 450 | 700 | 40:1 | 7.5 | 13 | 10 | 1000 |
Note:
- Measurements are made with actuators in connection with stable power supplies and ambient temperature at 20°C.
- For example, when real load is 800N, choosing code (K) is fine. Of course, you can also choose (G) or (J) which come with more load buffer, higher safety factor and longer product service time.
- There are many factors affecting the “customizable maximum stroke”, such as load, speed, force direction, etc., so the real application scenarios should be considered. If the parameters you required are not listed, please contact our sales engineers.
Linear Actuator Standard Dimension (mm)
| Front Mount. Ends | Rear Mount. Ends | A | B | S | L |
| F01 | R01 | Sideway cable outlet | Bottom cable outlet | Stroke | Install Length |
| A≥S+105 | |||||
| S=50~299mm, B+0mm | |||||
| S=300~499mm, B+15mm | |||||
| S≥500mm, B+25mm | |||||
| L≥A+B |
12V/24V/36V/48V Linear Actuator Current-Load Curve
Limit Switches without signal feedback
| Power Wire Coding | ||
| / | Brown | Red |
| Extend | – | + |
| Retract | + | – |
Endstop Signal
| Power Wire Coding | ||
| / | Brown | Blue |
| Extend | – | + |
| Retract | + | – |
| Signal Wire Coding | ||
| Black | Extend / Retract limit, N.O. | |
| Red | Extend / Retract limit, N.C. | |
| Yellow | Extend limit. COM. | |
| White | Retract limit. COM. |
Potentiometer
| Code | Max. Stroke | Resistance Value per mm | |
| A, D, G, J | 200 mm | 0.047 KΩ | |
| B, E, H, K | 300 mm | 0.030 KΩ | |
| C, F, I, L | 450 mm | 0.020 KΩ | |
Tips: Difference between linear actuator and electric-hydraulic pusher
Linear Actuator
The linear actuator has novel and delicate design, small size, high precision, complete synchronization, good self-lock performance, sanitary, direct motor driving, and requires to gas source or oil pipe.
Application of linear actuator: widely used in the seat backrest lift in the plane, ship and luxury car, as well as the straight line pushing and expansion of the massage chair, massage bed, fire-fighting equipment, medical equipment, furniture and so on.
Electric-hydraulic Pusher
The electric-hydraulic pusher hydraulic control valve is mainly constituted by the overflow valve, oil absorption one-way valve, speed regulating valve, hydraulic control one-way valve (hydraulic lock) and so on. The oil loop combination valve of different functions can be designed according to the working characteristics of the electric-hydraulic pusher, so as to meet its working requirement.
Application of electric-hydraulic pusher: Widely used in metallurgy, mining, power, coal, machinery, transportation, food, chemical, cement, water conservancy, building material, transportation and other departments.
Both linear actuator and electric-hydraulic pusher are machinery in straight line movement. The difference is that one is the electromechanical liquid and the other is the electromechanical equipment. The main difference is that electric-hydraulic pusher is in liquid transmission, thus having unstable speed, poor accuracy, and liquid leakage after being used for a long period. The liquid has to be supplemented from time to time, so as to cause wastage and pollution.
Reviews
There are no reviews yet.