Description
5 kVA Single Phase Automatic Voltage Stabilizer for Home with features like automatic restart, turn-on delay, time-delay system and high & low voltage cut-off that provide efficient and reliable protection for home electronic appliances against voltage problems.
Specifications
| Product Name | Automatic Voltage Stabilizer |
| Model Number | ATOSVC-5000 |
| Technology | Relay Control System + Programmed control computerized + control algorithm relay “Cross zero” |
| Capacity | 5 kVA (The power capacity of the voltage stabilizer needs to be 1.5~2 times greater than the load power) |
| Phase | Single Phase |
| Input Voltage Range | ±15% tolerance of output voltage |
| Output Voltage | 220V±3%/ 230V±3%/ 240V±3%/ 110V±3% |
| Adjust Time | <1sec. (Against 10% input voltage deviation) |
| Frequency | 50Hz/60Hz |
| Current Type | AC |
| Protection Over Voltage | <250±2V |
| Protection Lack Voltage | <185±2V |
| Ambient Temperature | -10°C~+40°C |
| Insulation Resistance | ≥5MΩ |
| Temperature Protection | 110℃±10℃ |
| Relative Humidity | <90% |
| Wave Form Distortion | No additional waveform distortion |
| Efficiency | >95% |
| Display | LED |
| Protection Grade | IP20 |
| Dielectric Strength | 1500V/min |
| Certification | CE, RoHS |
| Warranty Period | 12 months |
| Weight | 14 Kg |
| Size | LxWxH=470x240x190mm |
| Note: The provided 5 kVA voltage stabilizer is 1-phase (L, N, G) by European standards. We can customize the split phase (L1, L2 + G) like the USA standard, just confirm with us by email after ordering. |
Details
4 tips for maintenance of a voltage stabilizer
- The voltage stabilizer should be placed in well-ventilated and dry indoors, without direct sunlight or corrosive gas.
- The voltage stabilizer power should be larger than the total power of all power consumption equipment.
- The voltage stabilizer switch can’t be used as the master switch of devices. Turn on the voltage stabilizer switch first, then connect different power consumption equipment by increasing the order of power as there’s power output. When turning off devices, follow a decreasing order of power and turn off the voltage stabilizer switch at last.
- The voltage stabilizer switch shall not be turned off frequently, the interval between two turn-ons shall not be more than 10 seconds, otherwise, the voltage stabilizer would be protected by mistake, or even damaged.
Reviews
There are no reviews yet.